*If you are using Hatch 3, please click this link for the steps. ![]() You will then need to follow the directions included with that device. Some embroidery machines use a reader box. Usually this is via a USB stick, which means you can "export" your design files directly to the USB stick and plug it into your embroidery machine. What if I cannot connect directly to my machine?įirstly see how your machine accepts the stitch files. If your machine can be connected directly to Hatch Embroidery, it will now be connected and you can send designs directly to your embroidery machine. 3.1 Needle Select Press icon and go into the menu like Fig3.1. It is also able to change the colors of the embroidery design displayed on the screen. Select the "Location" of your machine as shown in Windows Explorer (4) Needle Setting (Selects or changes the needle bar) This function is to enable automatic change of needle bars when the thread color change code appears. Select the "File type" your machine uses. Select your "Machine" or a machine from the same brand, or select "Others" (2)Ħ. From within Hatch Embroidery click on the "Transfer" iconĥ. If not.then your machine is not capable of direct connections.ģ. If so.then you may be able to connect directly with Hatch Embroidery and proceed to step 3 below. Open Windows Explorer and check if you can see the machine as an external drive Connect your embroidery machine to the computer with the cable.Ģ. Try to direct connect with Hatch Embroidery.ġ. Wilcom offers commercial-grade software that may be able to do this for your machine. If your machine requires a special data cable to transfer or special machine drivers, most likely you will not be able to connect directly. Not all machines have this capability as most now have a USB to save the design file on and removed this capability. IMPORTANT: If your embroidery machine can be seen as an external drive in Windows Explorer, you may be able to directly connect send designs from Hatch Embroidery to the machine. This means you can click 'transfer' and the file will go directly to the machine without the need for a USB stick. ![]() Some users want to connect their embroidery software directly to the machine. How to connect directly to an embroidery machine?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |